Products for ports and harbours

Products

Protect ports and harbours with Jotun’s certified solutions. From chemical resistance to coatings with fire protection – find all of the products you need to keep ports operational below.

South East Asia & Pacific

Myanmar

Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

Multipurpose
High robustness
Abrasion resistant

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Anticorrosive primers

Resist 65

Resist 65 is a 65% zinc ethyl silicate primer for corrosive environments.

Designed for corrosive environments
High-volume solids
65% zinc dust content

Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

Low application cost
Resistant to dry heat up to 120 C
Easy to use

Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anticorrosive epoxy coating for new construction.

Versatile waterborne epoxy
Very low VOC emissions
Contributes to green building standard credits

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

Surface tolerant
Can be applied on damp surfaces
High abrasion and impact resistance

Anticorrosive primers

Barrier 77

Barrier 77 is a 77% zinc dust epoxy primer for corrosive environments.

For corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Penguard Express

Penguard Express is a fast drying, high-build epoxy coating.

Fast dry-to-recoat
Fast dry-to-handle
Wide application temperature range

Topcoats

Hardtop XP II

Hardtop XP II is an exceptionally versatile and efficient topcoat that provides a solution for countless scenarios, where durability and performance are key priorities.

Lasting aesthetics
Exceptional versatility
Improved hardness development

Anticorrosive primers

Barrier 80 S

Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.

For severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Topcoats

Pilot WF

Pilot WF is an easy-to-apply, one-component topcoat with a premium finish.

Very fast drying
Easy to apply with brush and roller
Attractive finish

Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.