0 favourite products

Most searched terms

Green Building Solutions Hull Skating Solutions Hull Performance Solutions Jotachar Architecture and design Offshore

Go to

Technical documents Product finder

Carriers and cargo

About Products
About
Products

Products

Please contact your local Sales Representative from Jotun for product availability in your country.

Showing 18 of 69 items

Active filters:
South East Asia & Pacific
Thailand
Jotachar JF750 XT logo
Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

  • Proven all-climate performance
  • Tested at the world's only Arctic test station for coatings
  • Patent pending flexible binder technology
Jotun SeaQuantum Skate Logo
Fouling protection

SeaQuantum Skate

Developed specifically to optimise performance in combination with Jotun HullSkater, delivering reliable long-term performance as an integral part of Jotun Hull Skating Solutions.​

  • Verifiable 0.5% speed loss
  • Up to 16.2% fuel savings
  • Unlimited idle days
Jotun SeaQuantum Ultra III Logo
Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

  • Verifiable 2.0% speed loss
  • Up to 11.7% fuel savings
  • For low-activity trade
Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Cargo hold coatings

Jotaguard 690 S

Designed to provide the ultimate cargo-hold protection with excellent abrasion resistance.

  • The ultimate cargo-hold protection
  • Supreme mechanical strength against abrasion and impact
  • Fast recoating/drying times
Jotun Hardtop AX Logo
Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

  • Robust finish
  • Easy application
  • Superior durability
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Marathon IQ2 Logo
Mechanically resistant coatings

Marathon IQ2

Marathon IQ2 is a smooth-surface coating with ice-slip properties.

  • Smooth surface
  • Ice-slip properties
  • High impact and abrasion resistance
Jotun Balloxy HB Light Logo
Anticorrosive primers

Balloxy HB Light

A high build epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

  • IMO PSPC for WBT approved
  • Surface-tolerant
  • High solids
Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

  • Low application cost
  • Resistant to dry heat up to 120 C
  • Easy to use
Jotun Hardtop Pro Logo
Topcoats

Hardtop Pro

Hardtop Pro is a premium, durable polysiloxane topcoat with a superior, long-lasting appearance.

  • Superior colour and gloss retention
  • Excellent long-lasting appearance
  • Excellent application properties
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments
Jotun Marathon 550 Logo
Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

  • Surface tolerant
  • Can be applied on damp surfaces
  • High abrasion and impact resistance
Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat resistant up to 205 °C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150 °C
Jotun Balloxy BT Logo
Anticorrosive primers

Balloxy BT

An epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

  • Surface-tolerant
  • High solids
  • IMO PSPC for WBT and COT approved
Jotun Jotacote F60 Logo
Anticorrosive primers

Jotacote F60

Jotacote F60 is a pure epoxy outfitting primer.

  • Specially design outfitting primer
  • Optimal adhesion to a wide range of substrates
  • Wide temperature range
Jotun SeaQuantum Ultra S Logo
Fouling protection

SeaQuantum Ultra S

Offers an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 10.2%​.

  • Verifiable 2.5% speed loss
  • Up to 10.2% fuel savings
  • For low-activity trade

Showing 18 of 69 items