Products for energy industries

Products

Browse products for energy industries.

South East Asia & Pacific

Thailand

Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

Ceramically reinforced
Easy 1:1 mixing
Surface-tolerant

Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

Verifiable 2.0% speed loss
Up to 11.7% fuel savings
For low-activity trade

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

Surface-tolerant
Short overcoating intervals
User friendly

Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

Multipurpose
High robustness
Abrasion resistant

Anticorrosive primers

Marathon 1000 GF

An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.

Excellent impact and abrasion resistance
Enforced with 20% glass flakes
Solvent-free

Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anticorrosive coating for use all year.

Fast dry-to-recoat
Fast dry-to-handle
High build

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

Proven all-climate performance
Tested at the world's only Arctic test station for coatings
Patent pending flexible binder technology

Powder coatings

Jotaguard VA

Specifically designed as an anticorrosion coating for valves and fittings.

Corrosion protection for valves and fittings
Drinking-water safe
WRc listed

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Anticorrosive primers

Barrier

Barrier is an 80% zinc epoxy primer for highly corrosive environments.

For severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Anticorrosive primers

Resist 86

Resist 86 is an 85% zinc ethyl silicate primer for severe corrosive environments.

Designed for severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Mechanically resistant coatings

Baltoflake

Baltoflake is a high-build polyester coating with an outstanding track record.

Exceptional lifetime in extreme conditions
Close to 40 years real-life North Sea experience
Extremely fast curing

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Building - exterior

Primax Defend

Primax Defend is zinc-free powder primer with standard corrosion resistance.

Very good corrosion protection
Very good mechanical properties
Protection for up to C4 Very High corrosivity category

Anticorrosive primers

Barrier Plus

A high-solids epoxy primer with very high zinc dust content for severe corrosive environments.

For severe corrosive environments
Fast dry-to-recoat
Fast dry-to-handle

Powder coatings

Primax Xtend

A superior corrosion-resistant powder coating primer that delivers improved impact resistance.

Zinc-free powder primer
Excellent corrosion protection
Lower powder consumption

Showing 18 of 85 items

Most searched terms

Go to

Products