0 favourite products

Most searched terms

Green Building Solutions Hull Skating Solutions Hull Performance Solutions Jotachar Architecture and design Offshore

Go to

Technical documents Product finder

Product finder

Use the filters below to browse our products.

Showing 18 of 59 items

Active filters:
Energy
Onshore oil gas and petrochemicals
South East Asia & Pacific
Malaysia
Jotachar JF750 XT logo
Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

  • Proven all-climate performance
  • Tested at the world's only Arctic test station for coatings
  • Patent pending flexible binder technology
Jotun Barrier Smart Pack Logo
Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

  • Ceramically reinforced
  • Easy 1:1 mixing
  • Surface-tolerant
Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Powder coatings

Jotaguard VA

Specifically designed as an anticorrosion coating for valves and fittings.

  • Corrosion protection for valves and fittings
  • Drinking-water safe
  • WRc listed
Jotun Hardtop AX Logo
Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

  • Robust finish
  • Easy application
  • Superior durability
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Penguard W Logo
Anticorrosive primers

Penguard WF

Penguard WF is a waterborne anticorrosive epoxy coating for new construction.

  • Versatile waterborne epoxy
  • Very low VOC emissions
  • Contributes to green building standard credits
Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

  • Heat resistant up to 205 °C continuous
  • Suitable for maintenance
  • Can be applied on hot substrates up to 150 °C
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250 °C
Jotun Marathon 550 Logo
Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

  • Surface tolerant
  • Can be applied on damp surfaces
  • High abrasion and impact resistance
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments
Powder coatings

Jotapipe AC

A versatile range of powder coatings for pipelines providing superior anti-corrosion and performance capabilities.

  • Stand-alone single layer FBE coating
  • Primer for three-layer coating
  • Suitable for all coating plant configurations
Jotun Barrier 77 Logo
Anticorrosive primers

Barrier 77

Barrier 77 is a 77% zinc dust epoxy primer for corrosive environments.

  • For corrosive environments
  • Fast dry-to-recoat
  • Fast dry-to-handle
Jotun Hardtop One Logo
Topcoats

Hardtop One

A one-component polysiloxane topcoat giving a beautiful finish by brush, roller, and airless spray.

  • Superior colour and gloss retention
  • One component for simplicity
  • Excellent application properties by brush, roller, and airless spray
Jotun Penguard Express Logo
Anticorrosive primers

Penguard Express

Penguard Express is a fast drying, high-build epoxy coating.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • Wide application temperature range
Powder coatings

Jotapipe LT

A range of Low Application Temperature (LAT) Fusion-Bonded Epoxy (FBE) powder coatings for pipelines.

  • Low application temperature
  • Works with high grade steel
  • Reduced polyolefin usage
Jotun Barrier 80 S Logo
Anticorrosive primers

Barrier 80 S

Barrier 80 S is a high-solids epoxy primer with 80% zinc dust for severe corrosive environments.

  • For severe corrosive environments
  • Fast dry-to-recoat
  • Fast dry-to-handle

Showing 18 of 59 items