Products for supply | Jotun

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to LEED and BREEAM credits.

Surface-tolerant
Short overcoating intervals
User friendly

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Anticorrosive primers

Balloxy HB Light

A high build epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

IMO PSPC for WBT approved
Surface-tolerant
High solids

Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

Low application cost
Resistant to dry heat up to 120 C
Easy to use

Topcoats

Hardtop Optima

A polysiloxane topcoat with a durable, premium finish and excellent application properties.

Outstanding durability
Excellent colour and gloss retention
Isocyanate-free for a safer work environment

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Heat resistant coatings

Epoxy HR

A heat resistant phonolic/novolac epoxy coating for temperatures from -196 to 205 °C.

Heat resistant up to 205 °C continuous
Suitable for maintenance
Can be applied on hot substrates up to 150 °C

Anticorrosive primers

Jotacote F60

Jotacote F60 is a pure epoxy outfitting primer.

Specially design outfitting primer
Optimal adhesion to a wide range of substrates
Wide temperature range

Anticorrosive primers

Balloxy BT

An epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

Surface-tolerant
High solids
IMO PSPC for WBT and COT approved

Fouling protection

SeaQuantum Ultra S

Offers an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 10.2%.

Verifiable 2.5% speed loss
Up to 10.2% fuel savings
For low-activity trade

Fouling protection

SeaQuest Endura

Optimised for vessels requiring flexibility in operational parameters, and frequent changes in trade.

Expected 1.3% speed loss
Offering flexibility for vessels with unpredictable trade
High initial idle period up to 120 days

Anticorrosive primers

Jotamastic 85

A multi-purpose, robust and efficient, surface tolerant primer that can be used on multiple application areas in different temperatures with short overcoating intervals.